Tarot T1000 Octocopter maiden flight with 3 axis gimbal and Radian System

Subscribe to this channel here: http://www.youtube.com/subscription_center?add_user=Locoracers Did the maiden flight today with my Tarot T1000 and the 3 axis gimbal. Went surprisingly flawless. Sorry for the bad quality of the Canon 600D but it was already getting dark and I do not have a fix lens at the moment. Will get one soon . This represents basically the flight done after coming straight from the building bench. The Radian System has been setup just on the bench before that flight and you can see that the stabilization is pretty good. I have also tried to use the Tarot ZYX GS System but was not able to get really decent results out of it. Also it seemed to me that the gains were not stable (Temp Drift e.t.c.) No color correction or warping has been applied to the footage. Sensitivity of the DJI Wookong has been set initially to approx. 200 on all parameters. Check out the second flight with a Sony Camcorder here: http://youtu.be/4rUDns1nXLU I have set up the rig to allow a camera operator controlling the gimbal independently using a Futaba T14SG as second TX. Some technical details: - Flightcontroller DJI Wookong-M - 8 Motors (Tarot 4114/320) and ESC (DUALSKY XC4018CA Brushless ESC 40A) - 3 axis Gimbal is powered from a Castle BEC 20A and a 3S battery - Props are Silentwing Carbon 15 x 5.5 - Gimbal is a Tarot 5D 3 axis gimbal with Radian System and FF Servos Find Locoracers on Facebook: https://www.facebook.com/pages/Locoracers-RC-Fun/117284075011990?ref=hl See the other flights: http://youtu.be/NwOUCw_wOSE http://youtu.be/4rUDns1nXLU