1. Make a bend in the middle and make two parallel lines.
2. Make a counter clock–wise coil under itself and place over the left cord.
3. Make a slight bend in the left cord and pull through the coil from step 2.
4. Wrap the left working end in a counter–clockwise direction under the right working end and through the bend made in step 3.
5. Slightly tighten the cords. This will make a Carrick Bend; see picture 6.
6. Wrap the left cord counter clockwise and through the center of the Carrick Bend.
7. Wrap the right cord counter clockwise and through the center of the Carrick Bend.
8. Tighten the knot. Use pliers if needed.
#MerlettKA#всеруками#паракорд#узлыизпаракорда#узлыпаракорд#узлямакраме#узелпаракорд#узелпуговка
***********************************
Схемы в комментах под фото, которое выше /кликните по картинке (дважды) и прокрутите колесико мышки вниз/
.. ссылка на весь каталог в описании под фото
https://www.liveinternet.ru/users/merlettka/post483779012/
***********************************
Мы используем cookie-файлы, чтобы улучшить сервисы для вас. Если ваш возраст менее 13 лет, настроить cookie-файлы должен ваш законный представитель. Больше информации
Нет комментариев