ECU software news

ECU software is a fully automated software. With it, you can remove engine control modules: DPF, EGR, SCR, LSU, VSA, TVA, MAF, SAP, SPEED LIMITE, EVAP, TORQUE LIMITED, START / STOP, HOT START, NOX, IT_SENSOR. The DTC REMOVER module allows you to delete associated engine errors. ECU software supports working with both cars and trucks, agricultural machinery, buses, boats and specials. technique.
ECU software is adapted for any user. Our software is divided into two versions: engineering and user.
The user version works according to the following principle: you upload the file to the program, the program automatically detects data from the firmware about the control unit, then checks for the presence of a solution in the database and deletes the selected command.
The engineering version works directly with the source material, such as damos, ramen. The user downloads the firmware, the program accesses damos, ramen. Then it analyzes the possible functions and offers to select the desired function for deletion.
For specialists who work with warranty vehicles or vehicles located in Europe, the CVN and VehlieInspection functions are available. This function helps to simulate the initial state of the control unit after removing environmental systems or a tuning chip. Using this function, the car will remain under warranty and you will have no problems checking.
The Checksum module will help you recount the checksum after removing environmental systems or a tuning chip, which will save you from the likelihood of damage to the control unit after recording.
VINCODE module will help you to adjust the Vincode in any firmware.
The Chip tuning module is divided into two types of tuning: manual and automatic.
The principle of manual tuning chip tuning is as follows: the program performs auto-detection of cards and displays all the necessary cards for the downloaded firmware. Further, using the program’s functionality such as hex mode, 2d mode, 3d mode, you make the correction of the cards you need.
When using automatic tuning, the chip tuners need to load the file into the program and select the desired type of tuning, such as stage1, stage2 or stage 3. After that, you will get the finished file.
ECU software works with all existing brands of equipment in the European Asian and American markets.
ECU software is implemented both in the Full version and in modules. To work with data, you must have an Internet connection and an electronic security key ECU Company. You can bind both the Full version of the program and a separate module to one key. If you linked a separate module, then you have the option of adding other modules.
In addition to software, users can use the online service egroffservice.com to process one-time files. Registration on the service is absolutely free. On our service you can process any number of files at any time and payment will be charged only when you want to download the file.
ECU software supports a wide variety of ECU blocks. You can be sure of the correct operation of our software, because the developers tested it on REAL cars.
We value our customers very much, therefore we have round-the-clock technical support for users. There is a chat for English-speaking users. http://auto-profi.com.ua/forum/index.php?showtopic=5325&hl= +38 044-360-11-48
+38 050-598-74-90 Viber
+38 098-415-60-60
+38 094-92-48-148 WhatsApp
e-mail: kiev0443601148@gmail.com Skype: nanoport1
Telegram: @nanoport1